Gday Jennifer
Quote:
I'll set my gear up and see if I can get my system to reset to 5CE1 - and then hopefully I can work out how to patch the thing using the update you have so graciously posted.
Wish me luck....
|
No luck involved, however, loading 5CE1 and the patch is done at the same time.
Download and Install StarPatch
Manually download the 5CE1 rom and 5CE1 patch
( or use StarPatch's inbuilt updater to grab them )
Start your scope and connect the update cable as per normal.
In Starpatch, select the handbox type as 497EP ( via menu )
Select the patch file ( ends in .spf ) via the selection box.
The system will load the patch and you can see all the bits
and what they do.
Select the patch options you want to use
Hit go.
Starpatch will validate the patch and yr Hbx, and if OK will load the data.
Once loaded, it will reboot the Hbx, but you need to cycle the power to get a true restart.
After the firmware is loaded, you are ready to go.
Andrew