[Nico (John)]

C2 180mm x 300mm mini lathe and 13mm bench drill.

mini lathe comes with a phase 2 quick change tool post, 5 3/8 inch tool holders carbide and HSS tools with indexable bits. The tool holders provided suit the 3/8 tools, boring bar and cutoff tools. Also provided is the gear set which came with the lathe originally. Photos attached.

Also provided are a number of replacement indexable bits, thread gauge, and 13mm chuck. The lathe has also had a modification kit installed that replaces the cross slide and compound rest adjustment screws making it easier to setup.

The lathe was purchased from hareandforbes and has seen little work. All work I have done has been with alluminium. I have used to make some adaptors and odd jobs with teflon/plastic.

I'm asking $1000 for the lot, lathe and bench drill pickup only (Melbourne). Sorry I won't split the tooling.

John