John,
Not sure you were aware that the CFL with 68mm threaded DT comes standard with both 2" EP adaptor and 1.25" EP adaptor.
These are close fit to the DT - 1.25" EP adaptor is a bit heavy as its milled from solid!
Also FYI pics of my TSOAG9 and 2.5" TS Flatener config. Plus development plans for looming 5M USB2 braided camera data cables. Power cables loomed separately both off the rear of the OTA to clear G11 motors etc.
The 1" threaded extension is useful for some EP configs but not required for imaging with the 3" DT.
Here is the link to the Moonlite 68mm threaded extensions:
http://www.focuser.com/cgi-bin/dman....duct=68mm-ring
David