Quote:
Originally Posted by traveller
I bought my c8 from the US, so it came with US style plug, two flanges parallel. I have two questions which the sparkies out there may be able to help.
1. The power cord to the transformer has a label on it which reads "10a, 125v". Will I have any problems if I plug it into a 240v power outlet? The transformer says 100-240v, 50/60Hz, 800mA. My guess is not, but never hurts to ask.
2. One of the two flanges has a flared end, which makes it slightly wider/taller than the other flange (still the same thickness and length). Is this the active side? Can I bend the flanges to suit the v configuration of Aust power outlets or should I get an adapter? If adapter, does it matter if the flared flange goes in one way or the other?
Thanks !
|
The power supplies on these are universal 100-250v 50-60 hz. However the leads are supplied for the power system of the destined country. Any item of this nature bought from the US will normally have the standard US type power plug like you have . An adator can be purchased from Dick Smith or Jaycar to use in the Australian standard .
You could also cut the plug off and put one of the correct type. However if you are not a licenced electrician this is strictly illegal and is not advisable.
Barry