Quote:
Originally Posted by traveller
1. The power cord to the transformer has a label on it which reads "10a, 125v". Will I have any problems if I plug it into a 240v power outlet? The transformer says 100-240v, 50/60Hz, 800mA. My guess is not, but never hurts to ask.
|
It will not be a problem.
Quote:
Originally Posted by traveller
2. One of the two flanges has a flared end, which makes it slightly wider/taller than the other flange (still the same thickness and length). Is this the active side?
|
The wide blade is the neutral. The narrow blade is the hot.
Quote:
Originally Posted by traveller
Can I bend the flanges to suit the v configuration of Aust power outlets or should I get an adapter?
|
Please use an adapter.
Quote:
Originally Posted by traveller
If adapter, does it matter if the flared flange goes in one way or the other?
|
The adapter should take care of this for you.