View Single Post
  #2  
Old 29-07-2011, 11:42 AM
casstony
Registered User

casstony is offline
 
Join Date: Feb 2006
Location: Warragul, Vic
Posts: 4,494
You'll be able to get it to work Vincent, it's just a matter of finding the right combination of diagonal and barlow/corrector.

If you're using a 2" diagonal you could try a 1.25" diagonal which chews up less back focus. A 2" GSO barlow element screwed onto the nose of the 2" diagonal might work. A short 2x barlow instead of the 1.6x supplied corrector could work. You could try screwing the supplied 1.6x corrector onto the nose of a 1.25" diagonal.

EDIT: actually a long 1.25" 2x balow would give a lower magnification than a short barlow, but be careful that the barlow doesn't bottom out on the mirror.

Last edited by casstony; 29-07-2011 at 11:57 AM.
Reply With Quote