Quote:
Originally Posted by ballaratdragons
470uF's and the 1000uF's are all 6.3 volts Gary.
|
Hi Ken,
In that case, don't use those electrolytics.
If you were planning on using the camera over the weekend, you can dispense with
the capacitors for now. When you get a chance, order a 0.22uF or 0.33uF
tantalum
of a rating of, say, 35V for the input and a
ceramic disk 0.1uF (100nF) for the output.
Solder them straight across the input terminal to ground and the
output terminal to ground, as in your original drawing, and keep the leads short.