I think I will have enough, yes. I may need yet another adapter though!
The MMOAG is only about 25mm thick + adapters to make it fit both sides.My current adapter from the flattener to the filter wheel is about 60mm. I can measure it tomorrow if you want. I don't think 10mm difference would stop it from working.
I have several adapters for the MMOAG. Hopefully one will work with my setup but chances are it won't.
Not a particularly clear photo of the setup but here is one I have:
http://www.pbase.com/gregbradley/image/108063152
I'll play around with what I have and let you know. I have a lot of adapters and its a matter of checking them all out. The Proline chip is about 31mm inside the camera so that would be different to an STL.
Greg.