Quote:
Originally Posted by rally
Paul,
I am surprised you are using this sort of fitting in your rig and at the same time expecting precision results in the arc second level. Its a waste of time.
I thought all Tak flatteners had screw threads at each end ?
RTM
Read the Tpoint manual and follow it - .
Rally
|
Point taken and I suspected this might actually be part of the problem or it solely. I will need to get either a new focusor or a screw fixing adapter for the Tak focusor. The flattener for the TOA/TSA series is a slide in version. I do have a reducer though and might get the adapter made up for it to the Camera by Precise Parts. I had one made for the flattener to camera. However this is most likely the problem.
I will re read all the manuals again with particular emphasis on the Tpoint one.
Once I get this nutted I will report back what the problem was. It might help someone else down the track.