View Single Post
  #8  
Old 23-04-2011, 02:03 PM
Barrykgerdes
Registered User

Barrykgerdes is offline
 
Join Date: Feb 2007
Location: Beaumont Hills NSW
Posts: 2,900
If you have the wall sheeting off a duct is the answer as already suggested. But that is only a minor problem.

What size TV do you want. Little 40Cms, can be supported on the simple pullout wall mounting bracket but if you have a 60" or larger in mind remember they ain't light. You will need a substantial bracket and a way to get the TV up to it. (maybe a roof anchor for the chain block!)

I thought about a wall bracket for a 55" but settled for a nice stand (cost as much as the TV) that holds all the periferals. Even so it takes two of us to lift it on and off the stand. This set has HDMI x3, VGA, componets x2, Video x1, Svideo x1, RF, Audio cables to each and USB, and of course power. I have cables running to all except two of the HDMI's. Along the back of the stand I have screwed two four way extension power blocks (should have used 6 way). They are all filled with leads to the accessories and two splitter amps that distribute the RF. Keeps all the leads nice and tidy.

Barry
Reply With Quote