Quote:
Originally Posted by TrevorW
Good one Marty
|
Thank you Trevor
Quote:
Originally Posted by CoolhandJo
Looks good. Nice work.
|
Thanks Paul
Quote:
Originally Posted by gregbradley
A nice image despite your trouble with the reducer.
That's the problem with the eyepiece holder type adapters, they sometimes sag and don't sit straight. I used to push them up whilst tightening as one way to reducer that. Ideally you have solid screw on type adapters but then they cost more.
Greg.
|
Thank you Greg
It is not the adapter but the two screws that hold the camera assembly in the focuser
Also sometimes they tighten right on the step of the focal reducer (it is a WO reducer/flattner).
I wish i could just screw the whole assembly on the scope so it would be rigidly connected.
Could go for a moonlight focusser but i am saving for a G11 at the moment.