Thread: [SOLD] 150750 reflector
View Single Post
  #1  
Old 05-01-2011, 08:00 PM
guodong
Registered User

guodong is offline
 
Join Date: Apr 2008
Location: wollongong, Australia
Posts: 39
150750 reflector

[SOLD] Thanks Zane

150750 reflector, Kenko NES mount (144-tooth). In good optical condition. A good choice for beginner. Note there are two broken on plastic parts (cap and a screw), as shown in photo. Bought here more than a year ago, but used only for 4-5 times. Have little chance to use it, so let it go.

No orginal motor drive, I used a EQ3-2 RA drive which is designed for 120-tooth worm wheel. I updated the controller chip for 144-tooth. It worked, but now doesn't, maybe because of the chip. I have another new chip shown in the photo. If someone is interested, I will test it.

Local pick up at Wollongong. Only telescope and mount 150AUD, with drive 200 AUD.

[SOLD] Thanks Mark

And a set of worm wheel for DIY. 144-teeth designed for EQ5 mount, but this one is specially made in copper. 30AUD

Cheers
Gordon

Last edited by guodong; 18-01-2011 at 06:38 PM.