View Single Post
  #1  
Old 08-12-2010, 02:46 PM
telemarker's Avatar
telemarker (Keith)
Registered User

telemarker is offline
 
Join Date: Mar 2008
Location: Canberra, Australia
Posts: 601
East movement after slew

My older mount - an LXD75 - has a bit of a problem. After completing a slew it will move to the east for a substantial distance before tracking commences. The same will occur after using the west button on the hand controller. This is not a simple case of backlash as the motor is turning at approx 2x sidereal during this movement.

I'm unable to calibrate PHD with a GPUSB. Is there a setting in the autostar controller that would be causing this?
Reply With Quote