|
Hi Darron acouple of very respectable images. The TEC can take some getting used to and needs to be controlled by turning it off then on again and placing it in Auto.
Better still is to get a copy of MaximDL and use the ascom drivers to control the whole lot from Maxim.
Having used QHY cameras for quite some time I can assure you my best results were when using Maxim.
Also my own finding about temprature with the QHY8Pro were that the optimum temprature for the Sony CCD was about -20 and at this temprature there is almost no need for darks. Not saying there is no improvement using them just there is not a huge difference but there is still some gains.
Good luck with it all.
|