|
After taking the white part out, I then screw in a Mogg Adaptor into it. This white section I hacksawed out to avoid pulling the camera board inside.
The silver section comes off fairly easily whereas the white section does not.
It cant be forced off as it will distort or damage the CCD sensor. This i found on my first unit. Distortion cause a colour issue while imaging.
The SNC900 Mogg adaptor just fits but there is a concern that there is not much thread to hold onto. The only other one is too long and crushes the sensor. I want to work on the best option and may require me to source or manufacture a seperate one.
I have gone through 3 units so far to come up with solutins so far, i need one more to to improve removal technique.
|