View Single Post
  #26  
Old 01-11-2010, 03:39 PM
Rick Petrie's Avatar
Rick Petrie
Rickapoodyandafandoogally

Rick Petrie is offline
 
Join Date: Aug 2007
Location: Mardi NSW, Australia
Posts: 1,123
Hi Dean
Did you try the smear of Kero over your ebony star to remove all gunk and wax.(kero dissolves wax really good)
Kero will also aid in a minor lubrication of the bearings and should not gunk up with further use.
As you know I used this method on my XX14i and have had no stiction problems since and the az action is very smooth. Kero also will not affect the teflon or ebony star laminate.
Cheers Rick
Reply With Quote