Yes I think this mount can work with any refractor it just needs to be sized appropriately. I would suggest 12mm plywood and 100mm diameter altitude discs. Perhaps 125-150mm diameter for the azimuth disc.
Check out this thread;
http://www.cloudynights.com/ubbthrea.../o/all/fpart/1
Also this one;
http://www.homebuiltastronomy.com/kidpeek/index.htm
This is the original design manual for this type of mount;
http://www.willbell.com/tm/tm2.htm
The original design is intended for a 6 inch f15 refractor.
For lighter telescopes it is possible to use a weightless design that does not require counterweights. This was described in the Sky and Telescope October 2000 issue, pages 138 - 141, telescope techniques.
Andy