Thread: encoder height
View Single Post
  #2  
Old 03-10-2010, 03:10 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,999
You can find a mechanical drawing of an encoder on our web site here -
http://www.wildcard-innovations.com....ncoder_dim.gif
The encoders used in the ServoCAT are identical.

The 1/4" diameter shaft is 1/2" long and when the shaft is fully recessed into a coupling,
the top of the body is then 0.76" above the top of the coupling.
Reply With Quote