Folks,
I can definitely confirm that Liz has setup the scope correctly as far as lat/long , time and date are concerned. I have a little experience with gotos as I have a cpc C9.25 myself and he's a beaut.
I have endeavoured to make sense of this scope for two days now and I really believe that there is a software issue. For instance; if carrying out a two star alignment using Alpha Cent as the first star then one would expect that if Hadar was chosen as the second star that the scope would at least move to the right - just a little but this one drives to what I think is 180 deg out around to the Nor West !
I have parked the scope and it does this at 000 deg alt and azimuth. OK so I line up on Celestial north ( close as I can) and try again to slew to 155 deg 40 deg alt where the scope says Alpha Cent is right now. This reading is in the handset and agrees with stellarium pretty well. Ok so nicely setup on Alpha and then select Canopus which according to Stellarium is displaced further around to the southwest and whoa off we go to the north east. I confess I am lost as to why this is. The thing seems to know where the first star is Ok but thereafter .......
Tried uploading new firmware but no joy with my usb/serial adapters on this thing.
Anyway I dont know what else to try so any more thoughts appreciated