|
Al,
You can use the small O rings in the kit to give some additional "rotation" of the T thread adaptors/ spacers.
I use a similiar set up on the C9.25/ 12" Lx but the Vixen at 90 degrees to the Spectra-L200; this allows the guide camera to be positioned inline with the focuser, the imaging camera at the side and the micrometer at the other....
(I also fit a safety strap to make sure if ANYTHING comes loose, then the unit can't fall!!)
The attached illustration didn't make it to final copy but does show the set-up well!
|