|
Hi Mike,
Not sure what version mine is, I think it's a V2. I got it when a few folks around here were trying it.
The manufacture date on the pcb is 07.01.25
When you look at the back of the board with the wiring down the bottom, from left to right they are:
1) Shield (black heatshrink over cable)
2) Ground (Black)
3) Data- (White)
4) Data+ (Green)
5) +5V (Red)
This would seem to correlate with your markings of:
gnd
gnd
dp
dm
5v
except your dp (Data+) and dm (Data-) are reversed.
If you follow standard USB colour coding, all should be sweet.
IIRC, mine would not work until I cut off the shield.
Cheers,
Jason.
|