[I.C.D (Ian)]

Originally Posted by h0ughy

do yourself a favour and get a losmandy style mouning plate and a eq6 puk to suit and ditch the other stuff

I have one of these http://www.admaccessories.com/D_Series_Saddles.htm

http://www.admaccessories.com/products/DSAD-EQ6.jpg

Thanks Dave for your help I found out that the dovetail for the Meade is 87 mm long ,the EQ6 saddle is 97 mm so the Meade dovetail was not fitting the EQ6 and the locking screws were locking the Meade dovetail to two flat sides and not in the dovetail it self which allowed the ota to fall out of the mount when was on it side
Again thanks

Ian C