[Brundah1 (David)]

With the Dollar up again last month, I ordered some ADM side by side bars, C8 and C11 D bars, radius blocks and a counter weight kit.

Delivery time from placing order - 5 days. All well packaged and customs dec as required. Ordering and communication excellent.

Prices direct from ADM very competitive. Note shipping costs sliding scale - max USD48 so group orders the go.

ADM "D" cross bar plus ADM Dual Saddle and ADM "D" Saddle; weighs 3.25Kgs. Not light but extremely rigid and excellent CNC machine work. Note ADM "D" saddles use two large knurled clamp screws which are sprung loaded. These "D" saddles are 7" long, providing excellent
holding power for large OTAs, worth comparing to standard Losmandy "D" saddles.

If you don't want multi- purpose config and want lighter weight, try this:
ADM "D" cross bar plus ADM "D" Saddle and ADM "V" Saddle weighs 2.85Kgs.

My only negative, I had to ream out the saddle clamp screw holes (by 10 thou) on two saddles as they tended to jam closed - now smooth as silk.

Also the counter weight kit design was not up to my "fussy B" standard.
The counter weight 1/2 inch UNC threaded rod is mounted flush on the "V" type saddle and secured by a small cap screw. I have machined and tapped a 1/2" UNC hole in the saddle and secured the threaded rod with a low profile self-locking nut. Now the kit is solid and works perfectly.
BTW this is for my CPC8.

Sorry can't supply weight for equivalent Losmandy.

I chose ADM for functional design and rigidity.

No affiliation with manufacturers yada yada.

David