Quote:
Originally Posted by peter_4059
I think you'll find all the bearings on the RA axis turn during tracking and two on the Dec axis are stationary when the dec clutch is locked.
|
Yep, I think you are right.. I mixed up shafts..
Still, I do not think there is a general need to replace any of bearings .
The main problem in EQ6 are transfer gears... and worm meshing to some extent.
The smooth PE curve is not a problem, and it can't be totally removed anyway.. it can only be reduced somewhat by adequate meshing (and that operation does not require dismantling of the mount).