Quote:
Originally Posted by NJB
Hi Gary (and anybody else who can help). It is clear here, so I have another chance to get this working.
I have set the Argo Navis Serial 2 to 9600 and Meade, then rebooted, then aligned on Acrux and Antares. I checked the alignment by going to Saturn via the AN Catalog function.
Then I set SkyFi to 9600 baud. Then SkyVoyager on the iPhone to Meade LX200 Classic and Dobsonian mount. Then I pressed connect, and it seems to connect, but the crosshairs are pointing at the North Celestial Pole when I have the scope pointing at the Zenith. When I move the scope the crosshairs move but always as if the Zenith is the NCP. I don't know what to try next to fix this.
Any help appreciated.
Noel
|
Hi Noel,
Thanks for the post.
When you performed the alignment, were you outdoors at night aligning on real
stars with the telescope or indoors during the day just performing a faux
alignment?
Best Regards
Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
Phone +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au