|
John,
while I don't use the QHY (Lodestar) I might suggest this.
In my case I have the guide cable and the USB cable together and streaming away from the camera. I then loop them both back over the camera, and have a cable tie on them, holding them tightly to the camera, but with a loose enough loop to allow the plugs to not stress. The down-side of this though is that if the cable(s) catch, they are tightly affixed to the camera, and Murphy's says it will break something other than the cheapest part.
Forget what I said, stick with the laccy-band, LOL.
Gary
|