[HarryD (Greg)]

Hi All

Great weather in Sydney at the moment. Never mind.

I am giving my EQDIR from Shoestring the flick, intermittent faults, and have purchased the eqdirect-usb lead from Dontronics. #16493.

I think I solder the leads as follows

Solder Pin 6 of the 9 way D-type Plug to the Orange wire.
Solder Pin 9 of the 9 way D-type Plug to the Yellow wire.
Solder Pins 4 & 5 of the 9 way D-type Plug to the Black wire.

Is pin 1 on the DE9 connector the pin on the top left and pin 9 on the bottom right when looking at the pins from the front?

If anyone has done this, is this what I should be doing?

I have looked at the eqmod site etc but just thought I'd ask first, just in case I have made a mistake.

Thanks

Harry