|
Gday Erick
If you have already loaded the firmware, then dont bother with cloning, its really of no use, and you need another cable,
Also, if the new Hbx is an EP type, you will need a second scope, as the raw EP firmware barfs badly unless it is connected to a valid scope.
The handbox only has 512bytes of eeprom, and 150 of these are PEC,
which you cant clone, and of the rest, only about 20bytes are really required to be copied.
I suggest you just connect the new Hbx to the scope, select the correct model, enter yr site and user details if reqd,
do a calibrate motors and thats it.
If you are running patched firmware, you can read out your old drive train numbers and enter them into the new Hbx, but thats about it.
My latest PEC Editor has a function to save a handbox image and restore it to another box if required, ( it requires that you have patched firmware loaded ), but in truth, other than drive train data, the rest is just fluff.
Its quicker to just do it manually
Andrew
|