[Lester]

Hi all, I have had this unit for about 6 months now, and seems to be working. However whenever humidity rises above 80% the corrector on the LX200 14" will dew up. So I have used a hair dryer to help the Kendrick keep the corrector dry.

I had the Kendrick set at 50% duty cycle and 5 degrees above ambient.

I just tried to reprogram the controller to 100% duty cycle and 5 degrees above ambient, and the output socket got very hot= too hot to keep hold of. Some sticky stuff oozed out of the connector.

Has anyone else had similar?

Comments welcome.