[sadia]

Over the last few weeks I have been busy with building a pier for my setup (I will post a seperate thread on the pier/observatory later with more detail on this). After curing the concrete for a while I thought it would be a good idea to set up everything for a test run before i build the deck and observatory arround it just to be sure that no additional adjustment would be required. This also the first light for STL.

Attached is 7x 5min Lum data only @-25C

Scope: TSA102 with Reducer
Mount: G11
CCD: STL11000m
Guiding: FS60C with Orion SSAG
Image Scale: Pempro measured 2.92 arcsec/pix