|
Yugant
Like Rob and yourself, I had the same issue. I just got my adaptor and cut it down with a hacksaw. In total my adaptor is now 25mm in length. And like Rob said, leave enough room on the adaptor to hold everything. Mine is 13.2mm above the collar. After I cut the adpator I drilled and tapped 3 holes to secure the MPCC. It took me about 5 minutes to cut it using the hacksaw. Works perfect.
If you can't find someone to do it, and you try it yourself, I found it easy by drawing a line around the entire circumference. Then as I cut, I just rotated the adaptor in the vice to make sure I stayed on the line. Ended up nice and square.
Good luck.
Darrell
|