Quote:
Originally Posted by Barrykgerdes
That concrete should stand close to 1 tonne per square inch.
Your water tank if mounted flat on the concrete will not add more than a few pounds per square inch. Don't worry
Baz
|
Thanks Barry - makes sense.
Quote:
Originally Posted by Bassnut
Dont use a brick base at all IMO, I found flat cemented bricks had no strength at all, the cement cracks or seperates from the brick with not much effort.
|
Good point. I'll get a concrete mower and level the slab so it's flat and maximise the contact with the water tank base.