Quote:
Originally Posted by bobson
What I would like to ask Bojan is what sort of connection did you use to connect encoders, since the order of connectors is not the same as on EK board.
|
I was using crimp connectors, similar to those available from RS components:
http://australia.rs-online.com/web/s...577+4294858891
http://australia.rs-online.com/web/s...duct&R=0334561
http://australia.rs-online.com/web/s...duct&R=0467605
It is easy to swap wires as the wires are crimped (or soldered) individually.
The holes on PCB can be enlarged with drill 0.8mm dia.
Yes, sadly, Jaycar and DSE are not what they used to be... they even do not know what they have in their stores any more..