View Single Post
  #7  
Old 13-12-2009, 01:51 PM
Gama's Avatar
Gama
Registered User

Gama is offline
 
Join Date: Dec 2005
Location: Melbourne
Posts: 1,121
You should run the guider on its own. If you have a few devices all off the same hub, then it will load down. The guiders run power from the USB, and if the voltage drops a little, it will lock, as the CMOS sensor is very tight on voltage. Try and use a single port from the PC to the guider. Some people use powered hubs, and i hear mixed results. I suppose it depends on how it maintains its devices thru the hub.

Theo
Reply With Quote