View Single Post
  #1  
Old 12-12-2009, 06:17 PM
mick pinner's Avatar
mick pinner
Astrolounge

mick pinner is offline
 
Join Date: Feb 2005
Location: monbulk-vic
Posts: 2,010
Alloy Tube and Rings

l've rolled the tube for my new 8" newt and fabricated new rings.
the tube is .8mm aluminium with a 10mm fold for rigidity at each end and then fitted the collars from the original skywatcher tube.
a set of baffles will be fitted in the next couple of days.
the rings are machined from 20mm aluminium plate and drilled to suit a modified Losmandy plate, holes in the side of the rings allow fitting another Losmandy plate which will hold a Stellavue 13 x 80 finder, this also allows the weight of the finder to go back over the mount and balance with a lot less counterweights.
Attached Thumbnails
Click for full-size image (IMG_0003.jpg)
86.2 KB46 views
Click for full-size image (IMG_0002.jpg)
98.0 KB45 views
Click for full-size image (IMG_0004.jpg)
131.5 KB47 views
Click for full-size image (IMG_0005.jpg)
92.3 KB40 views
Click for full-size image (IMG_0006.jpg)
82.7 KB46 views
Click for full-size image (IMG_0007.jpg)
86.1 KB44 views
Reply With Quote