Hi guys
Here is the link to the PCB Inkjet Printing document that I mentioned earlier in the thread. It's a 27MB document, so it may take a while to download.
It doesn't go into the etching process - that's pretty straight forward. I was more interested in the printing process. Following the printing, the laminate was baked at about 50-60C for about 15-20 minutes, then allowed to cool prior to inspection and etching.
http://www.iceinspace.com.au/uploads/PCB Inkjet Printing.doc
Obviously, it's really only for those that wish to get involved in some serious hacking, but the results are promising if you want many PCBs.
Cheers
John