|
Hi Bojan
Although I am drifting slightly off topic here, arguably it may be worthwhile if it prevents someone from frying their electronics with the wrong polarity!
The Vixen spec for my DD-1 Controller is a 2mm plug and the rating is 9v-12v DC. This system used Stepper Motors.
For the Vixen Skysensor 2000, it is a 2.1mm plug and the rating is 9v-14v DC. This system uses DC Servo motors.
The Vixen mounts are the older model GP and GPDX. The above plugs are the power plugs (both centre -ve) whereas the connectors to the SS2K motors look like an 8 pin DIN connector.
Cheers
Dennis
|