Quote:
Originally Posted by picklesrules
just wondering will this fit a HEQ5 Normal Mount ??
|
Sorry the HEQ5 is a 1:135 worm ratio which is not a standard ratio. This is set up for 1:144 however, this can be made to drive lets say a 1:180 ratio (like an EQ6) by changing the worm drive gear with a 40 tooth gear (in lieu of the current 50 tooth the GTS system uses.
You would also need to make your own motor mount plates as they are different to the Synta types. This could be done but it is getting "out there" a bit.
I have been trying to get the OEM manufacturers to release a firmware that will allow users to change gear ratios via the handset (thru motor encoder count ratio). The GTS actually has a menu selection for setting your own user gear ration but it is currently blocked!
I know the OEM has been fiddling with this "user gear ratio setting' as there is now a mount being made by BOSMA called the
EM11 (basically a Vixen SXD/SXW) that uses a 1:180 worm but also the std GTS/GTN handset ...but a different firmware.
Interesting times for this system.