Quote:
Originally Posted by Octane
Geoff,
Leave the camera in manual mode (as that is what you'll be shooting your lights with, as well) and set the ISO to ISO-100. Look through the viewfinder into your light box and adjust the shutter speed so that the exposure/meter falls on the centre tick (which is 0 EV). Take a photo and observe the histogram. Ideally, you want the histogram to peak somewhere between 1/3 to 1/2 way across the display. If it doesn't, then, increase or decrease the shutter speed.
|
Humayun,
Just wondering why set the camera to 100iso for the test. I usually take all of my Light frames at iso 800 so should I set the camera at 100 or the same as the light frames?
Thanks geoff