View Single Post
  #4  
Old 27-09-2005, 12:57 PM
John K's Avatar
John K
Registered User

John K is offline
 
Join Date: Sep 2005
Location: Melbourne
Posts: 1,481
Thanks for the comments.

Mike - I am using AMCAP to capture AVI's which came with the NexImage camera. Have downloaded K3CCCD and VirtualDub? but struggling somewhat to use the camera with these. Any suggestions on other easy to use capture software?

Using Registax Version 3.0.1.10 (I think there is one later one that just came out other than this one?)

I set the frame rate at 10fps and also 15 fps for Mars

The reason I would like to go to 3000-5000 frames is that the seeing in my location is so poor that I want the ability to knock off as many good frames as I can and eliminate 50% of the bad frames. I also think that with the NexImage camera, to reduce noise effectively, you need to get to around 1500 stacked frames for Mars (early experiences).

rumples riot - thanks for comments. Have been using the gradient function - also have tried Sigma Hi/Sigma lo

Last edited by John K; 27-09-2005 at 05:46 PM.
Reply With Quote