Quote:
Originally Posted by Peter Ward
Sure, if you drop the head and give the stepper a significant wack you will probably bend something there, but for normal use the system only has to hold a 1/4 hz, few inch/ounce torque rated stepper to hold in place....not a 428 bhp V8  |
No doubt!
At the end of the day, if you position your G11 inside your case wuth the motors up, and don't resort to flipping the case over at any time - letting the entire weight of the head slam down on them, the motors will be fine.
The aluminium post onto s/s studs is fine for holding the motor on - but no good for repetitive removal.