Quote:
Originally Posted by rogerg
Interesting Chris... mine has hex screws holding the motor in. They're long and silver - I think steel not aluminium. A very small hex/allen-key fits in the end to turn them, they came with it, it has a ball-like end so you can screw them in from an angle.
|
All correct, the standard motor bolts are hex head stainless steel.
That said, lord knows I've pestered Scott many times on this, the stainless hex head bolts screw into the derin gearbox case.
Not a problem so long as you don't over torque the bolts. My recommendation would be buy a case deep enough to leave the motors in situ, but also to remove them if you intend on shipping the mount.