|
Internal Dimensions
OK, here are some dimensions:-
Base:- 430mm x 290 x 120mm. The foam insert may well be a better measure and it is 425mm x 285mm
Lid:- 426mm x 286mm x 38mm
(EDIT - I wanted to get the internal height. I measured the stack of foam - I make it around 145mm. The heights/depths I measured above are from approximate bottom to highest ridge, but the lid and base press into each other onto the seal.))
The base and lid have rounded edges at bottom and top respectively, several mm would come off these dimensions there.
My EQ5 head and two counterweights just fit. Counterweight bar is off and may not fit as well.
Photos below and following.
Last edited by erick; 08-08-2009 at 08:14 PM.
|