|
Check out the Yahoo Lx200 group.
Blowing the capacitor is not an unusual occurance; can be easily fixed.
The alignment mark is on the outside surface of the corrector.
Yes, the secondary needs to be rotated to give best alignment to the primary.
BTW there's a capacitor in the hand controller (C5) which should also be replaced ASAP. If this one goes you loose the complete controller with very little hope of finding a replacement!!!! This cripples the whole scope and stops you using it at all!
I have both the 10" and 12" Lx200 and they work 100%
Drop me a PM if you think I can help.
|