Quote:
Originally Posted by mjeremy
3. The RA worm drive appears loose in it's housing - ie with the RA locked and I try and turn the fork arms I can see the whole worm drive assembly moving up and down - This is producing a large amount of backlash - I'm guessing there is a bolt loose? I havn't worked out how to get in there and check yet - though I'm guessing I csn take the bottom off for a closer look?
|
There's two allen keys which hold the RA motor in place. You probably just need to tighten them. They should be tight, but when tight the motor should have some spring in it such that you can spring it away from the cog a bit.
BINTEL is your best bet on advice, I think you should take it and have a chat to them, even if you end up doing all the work yourself. Unsure if you'll have luck getting replacement electronics.
Roger.