Quote:
Originally Posted by desanctb
 Wow! I have tried the setup direct from guider camera to ST4 port on Gemini with so-so results. Why do you even need the GPUSB? I thought on the newer G11 you can go direct from guide camera to gemini box. Is this because you want to optoisolate from electrical interference? Should I be going through my GPUSB box as well rather than direct connect? Thanks for your help? I've attached a pic, wanna trade?
PS; I'm imaging with a QHY8 these days
Ola |
Well good question. If you want to use the incamera ST4 connector then the program must support it. I have 2 QSI but never tried to use the in camera port as I do not even know how to do it.
From the former times I have left over the GPINT-PT as well as the GPUSB and so I just use them as I know it works.
If you have a GPUSB just use it and make yourself life easier ...
I have never seen a difference in guide results be it from the parallel port, serial port or USB port. Even if some people say USB is better I assume it is pure self imagination. The quantity of data being send for guiding is ridiculous