Quote:
Originally Posted by Barrykgerdes
Hi Mike
I don't quite get what you mean by a box coming up originally and not now.
The only telescope controls I use are the LX200 and these just read the position of the telescope in RA/Dec and feed it to Stellarium where the RA/Dec position on the screen is displayed as a circle and cross.
When you wish to slew the telescope you press Ctrl with the number you allocated to the scope and Stellarium sends the new RA/Dec coords to the scope followed by a slew (goto) command.
If you are using the ASCOM driver. This was written by someone not of the project so you will need to check with the ASCOM people. It is possible that the EQ mount driver supplied by them has changed.
Regarding a later user manual we are working on that and I have a version (incomplete) for version 0.10.2 but there are so many changes with 0.10.3 that I have stopped editing it till the changes are finalised.
Barry
|
When I initially pressed control-1, a two-section box came up with the choice of 'Slew' or 'sync' and an option to do only that function in future.
There is now no box when I press Control-1, it just slews.
In any case, how do you 'sync' in Stellarium?