|
Gday Barry
I think I adress your situation below but i dont know if I have an answer
I usually follow this procedure with the same set up (ie DL Essentials) -
Capture lights (Light Raw 1x1) -> Capture darks (Dark Raw 1x1)-> Colour Convert Lights -> Colour Convert Darks -> Calibrate -> Stack
However I just tried some different procedures I think as you are questioning on some raw data from the weekend
I tried
Set up calibrate with dark raws (no colour) -> open light raw (no colour) -> calibrate -> colour convert -> stack
then
Set up calibrate with dark raws (no colour) -> open light raw (no colour) -> calibrate -> stack -> colour convert
and both worked - in fact i couldnt see the difference in the final product in all 3
I did have this problem early when I was imaging as light clour then darks in dark raw - that is why I colour convert the darks before calibration now even though I capture in light raw now.
As I said no answer mate but if what I have described above doesnt follow the process you are questioning let me know (in *** -> *** ->*** format) and I will see if it works on my set up.
MB
|