|
Since I don't know off hand your experience level (apologies if you are well experienced) I will offer my comments on the assumption that you are a bit less experienced in the hobby.
I'd hold off on the filters for a while and use the scope as is for now. A common mistake that is made in the excitment of a new scope purchase is the aquisition of stuff that sounds/looks great but is of actual small value in enjoying the hobby. I've got a box full of stuff that was only used once or twice that I purchased in the heat of the moment.
However, there are a number of things I would highly recommend (if you don't already have them) that will enhance your viewing experience with a Dobsonian reflector.
For a Dobsonian reflector of your size I'd highly recommend a sturdy adjustable seat. I have an 8 inch and a 12.5 inch and my adjustable height chair is my most valued accessory. A comfortable adjustable chair lets me look longer at objects, study and enjoy them. I see more detail and spend more time on them...especially as the night rolls on I am able to view longer into the night because I am comfortable. There is a great one (but I am biased...a story for another time) available at Bintel (Stellar Seat) or you can build your own adjustable height chair (plans on the web).
A good quality collimation tool (not laser based intially)...my favorite is the Orion Collimating Eyepiece (about AUD$90 at Bintel). Collimating your reflecting telescope is something that you should do (will need to do) each time you use it in order to get the best views. Understanding how to collimate is important. I believe that a non-laser tool teaches this better and has fewer potential for "errors" than the cheap laser collimators many people rush out and buy. I generally suggest that you hold off on getting a laser tool until you understand the mechanics of collimation...then, when you do by all means run out and get a "quality" laser collimating tool...but when your batteries fail and you are 3 hours from town (and replacement batteries), you will still have your dependable and accurate Orion Tool and your night under dark skies can still be enjoyed.
The last "core" recommendation from me (and this is another of my preferences) is that I really like to have a Telrad on my dobsonian mounted telescopes. It is a zero magnification finder the allows me to look through a window with a "bulls-eye" on it to find objects in the sky. Once aligned with your telescope, it makes finding stuff a breeze and for me it is much more enjoyable/comfortable to use than a conventional finderscope. There are many charts and support materials that show you how to "star hop" with the Telrad. There are other brands at different price points but of the ones I've seen, I like the Telrad the best (my opinion).
Other things include a planisphere or chart (with Telrad hints), red light torch, table or stand (for chart or snacks). These thigns and a good scope and you are off to the races.
As a general comment, I would recommend that you use your gear "as is" for a while and get familiar with it. Once you have mastered collimation and can find a few objects in the night sky you will have a much better "feel" for what you might need or want to enhance your enjoyment of the hobby.
I'd sure try to avoid buying any additional eyepieces for a few months at least. After you are certain that you are going to stick with the hobby and have had enough viewing time to understand the things that you want to view and how you want to view them...then and only then, jump in and a buy a high quality widefield eyepiece...but that is a different thread altogether.
After you are set with your eyepieces...then consider a few filters that can help you enhance your viewing experience.
Enjoy your new scope and again my apologies if you are an "old salt" as my comments while still valid were targeted more toward a "newer" scope owner.
Clear Dark Skies!
|