Quote:
Originally Posted by sheeny
I would advise to check the drift alignment again, and if you can get 15 minutes with no drift at zenith and 15 minutes with no drift near the horizon, then the alignment is close. 
|
To save time, use the drift alignment tool in K3ccdtools both near zenith and horizon. It will show up any drift quicker than you'll see it by eye on the reticle, so you won't spend so long getting the mount accurate.
OK, if you aren't familiar with the K3 drift tool you'll have a learning curve, but if it ends up that the movement just has to be lived with, this learning curve will be worthwhile!
Al.